Staying at Home: The 7 Most Common Causes of Leaky Pipes

 

 

Plumbing leaks can be subtle and nigh imperceptible. However, as small as leaks may seem to be, they can eventually lead to costly plumbing problems. Leaky pipes don’t only cause water wastage, but they can also lead to structural damage and electrical risks if ignored.

It’s important for homeowners to understand the extent of the possible damage that a Di pipe could bring. It also helps to be aware of the usual causes of why pipes leak so you would know when to call an emergency plumber.

Below are the 7 top causes of leaky pipes:

1. Advanced corrosion

Regardless of their material, pipes will eventually wear out. For metal pipes, corrosion is the number one enemy you should look out for. Corrosion causes a pipe to be brittle and develop tiny openings. Pipes that were laid about 30 years ago are prone to corrosion problems. If the water coming out through your pipes has an imbalanced mineral content, you can expect corrosion to ensue at some point.

Signs of corrosion include discolouration and warped pipe shape. Contact Plumbing Authority drain repair in Bolton right away if you suspect your pipes are corroded and have them fixed right away. If your plumbing system is old, consider installing new pipes.

2. Clogged lines

Clogged drains can cause utter inconvenience. When left unaddressed, clogging may lead to overflow or pipe burst. Avoid unwanted clogging by cleaning your gutters and HVAC systems.

3. Too much water pressure

Image Credit: Kaboompics | Pexels

High water pressure is ideal for use when you’re taking a shower or cleaning. However, increased water pressure may heighten the risk of leaks and may even cause pipes to burst. Call a professional plumber to do a pressure check on your plumbing system and make needed adjustments.

4. Broken seals

You place a seal around water connectors when installing your fixtures or appliances to keep them airtight. Through time, the once fresh and new seal can degrade, break, or wear out. You may have a broken seal if you notice traces of condensation around your appliance.

5. Damaged pipe joints

Pipe joints, the part where your pipes are enjoined, are often considered a water line’s weakest areas. It’s no surprise if leaks start to take place, as pipe joints can deteriorate as time goes by. To know if there’s something wrong with your pipe joints, listen if they produce a banging or ticking noise when you switch on your hot water. To prevent this from happening, have a plumber inspect your system at least once a year.

6. Fixture cracks

A pipe that is joined to a cracked faucet may experience visible leaks. A crack on the faucet might be caused by a strong impact, breaking the fixture. In many instances, cracks develop unnoticed. They may happen in areas that are hidden from your sight. Have it checked and replaced right away.

7. Improper pipe laying

This is one of the most common culprits for serious leaks. This problem requires the expert hands of a licensed plumber. Avoid attempting to solve plumbing emergencies on your own as this may lead to expensive repairs in the long run. Ensure your pipes and connectors are laid the right way. If needed, use backflow devices.

If you’re uncertain about how your plumbing work was done and you’re not sure how your pipes were laid, don’t take chances. Call a plumber and let them evaluate your system. Hire a plumber in Scarborough that uses advanced equipment in the assessment and diagnosis of potential problems in plumbing systems. Using this technology makes repairs faster, efficient, and less costly on your end.

Regardless of the cause of your leaky pipes, it’s always best to entrust any plumbing concerns to your local plumber. They are equipped with tools, knowledge, and experience in protecting your systems from damage.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.